Halocell 221 - Water Based Epoxy Coating

It is an ideal product for use in any area or surface above or below ground which needs a highly durable coating capable of stopping dampness, preventing mould growth and gives a decorative finish, such as cellars, tunnels and basements.  Dries to a white, durable decorative finish.  HALOCELL 221 can be applied to concrete, natural stone, floor screed, render, brickwork, blockwork, plaster, asbestos cement and asphaltic substrate.  Easy to apply using a brush or roller. 

Is a two component, general purpose epoxy coating for use in locations where a durable finish is required.  It can be successfully applied to damp areas to prevent the ingress of ground water and mould growth.  HALOCELL 221 is an ideal product for use in cellars, tunnels, basements, underpasses and other subterranean areas where a clean, decorative and hygienic finish is required.

Description

Composition:  A two pack water dispersible epoxy resin coating.

Appearance:   HALOCELL 221 dries to a white, durable decorative finish.

Performance:  HALOCELL 221 can be applied to concrete, natural stone, floor screed, render, brickwork, blockwork, plaster, asbestos cement and asphaltic substrate.

Areas of use:   Any area or surface above or below ground which needs a highly durable coating capable of stopping dampness, preventing mould growth and gives a decorative finish.

Coverage:        Up to 40 square metres per 5 litres, per coat.  However, coverage will vary considerably depending on the porosity and texture of the substrate and the thickness required.

Availability:    5 litre kit (2 components) White only.  Red, Black, Grey and Green are available subject to special order and quantity.

Application:    Apply HALOCELL 221 by brush or roller.  Two coats are usually sufficient, however, a single coat may be adequate on certain surfaces.  Protect containers from frost and store in a dry location.  HALOCELL 221 may be applied to damp surfaces but should not be applied in frosty conditions.