Roofcoat FR10 Group

Roofcoat FR10 is a one part moisture curing polymeric waterproofing compound which is elastomeric and has exceptional adhesion to virtually any roofing material.  It has been specifically developed to provide instant waterproofing for leaking roofs, is an all-weather product and can be applied even in the wet.  ROOFCOAT FR10 can be used to repair specific areas which are leaking or totally waterproof an entire roof.  Large cracks, holes, tears, blisters and splits can be easily repaired using ROOFCOAT FR10 SCRIM.  The product is multi-purpose and can be utilised on a wide variety of problem areas.

The ROOFCOAT FR10 SYSTEM is easy to use, does not require special primers and gives long term protection of 10 years or more.

Benefits

• UP TO 10 YEAR LIFE
• WET WEATHER APPLICATION
• SINGLE COAT WATERPROOFING
• FIBRE REINFORCED COMPOUND
• AVAILABLE IN BLACK, GRAY AND WHITE
• ELASTOMERIC WHEN DRY
• OUTSTANDING ADHESION
• CAN BE USED ON A MULTITUDE OF ROOFING SURFACES
• SCRIM FOR REPAIR WORK
• VERY ECONOMICAL

Areas of Use 

1. FLAT ROOFS – can be used as a patch repair or to waterproof the whole roof area. Choice of colour including solar reflective white.  Cracks, tears and blisters can be repairs utilising ROOFCOAT FR10 SCRIM.
2. ASBESTOS ROOFS – will rejuvenate corrugated sheets, waterproofing and encapsulating the asbestos. In conjunction with ROOFCOAT FR10 SCRIM, ROOFCOAT FR10 can be used to mend split sheets.
3. PORCHES – porous leaking areas can be waterproofed easily with one coat of ROOFCOAT FR10.
4. FINLOCK GUTTERS – cleans out any debris and organic matter. Apply a coat of ROOFCOAT FR10 in a 6” band at the junction of the blocks and embed ROOFCOAT FR10 SCRIM.  When dry apply ROOFCOAT FR10 over the full length of gutter.
5. VALLEY/CAST IRON GUTTERS – ROOFCOAT FR10 can be used to waterproof gutters and repair leaking joints.
6. PLASTIC RAINWATER GOODS – ROOFCOAT FR10 can be used to repair splits, cracks and leaking joints.
7. FIBRE CEMENT GUTTERS – use LICHENITE to kill any algae, moss and lichen. Remove all silt, dirt and debris.  Apply one coat of ROOFCOAT FR10 to waterproof gutter.  Repair joints as (4) above.
8. FLASHINGS – leaking defective areas can be repaired with ROOFCOAT FR10.
9. BAY WINDOW TOPS – a very common area for leaks, which can be easily and economically rectified with one coat of ROOFCOAT FR10 in desired colour.
10. CORRUGATED TIN ROOFS – can be used to repair old and suspect sheets.  Spot prime areas of rust with proprietary inhibitor followed by one full coat of ROOFCOAT FR10.