Sempatap Edging Tape

SEMPATAP EDGING TAPE Use for taping joins, junctions, corners and edges to achieve a smooth professional finish.

Use to cover all external corners where SEMPATAP is used on walls and reveals. SEMPATAP EDGING TAPE is made of a heavy cartridge paper, on one side of which is an aluminium strip with a crease line through the centre.

SEMPATAP THERMAL insulating wall lining is not folded around corners but cut to the corner edge. Where two pieces of SEMPATAP join at external corners, cover with SEMPATAP EDGING TAPE.

APPLICATION: SEMPATAP EDGING TAPE is supplied in 10m and 30m rolls and can be cut to required length with scissors or sharp bladed knife. When cut to required length, fold along the plastic crease line to form a right angle. The plastic should be facing inside. When applied only the paper side is seen.

Brush SEMPATAP ADHESIVE along the plastic and the paper, set to one side and leave to soak for a couple of minutes.

Locate over the corner of the SEMPATAP and smooth out using a slightly damp sponge. The use of the sponge will remove any adhesive which squeezes out from under the edging tape. Leave to dry. SEMPATAP EDGING TAPE can be ‘feathered off’ using a proprietary ready-mixed filler.

HEALTH AND SAFETY: Good hygiene practices should be followed when applying SEMPATAP EDGING TAPE. Wear suitable gloves and eye protection. When using do not eat or drink. Keep away from children and animals. Wash hands after use. HEALTH & SAFETY DATA available upon request.